Available in grade SS10 e K30
Pr: fom 5,00 to 14,50 mm
D: from 5,77 to 16,74 mm
L: from 16,00 to 20,00 mm
Angle: 5°
Available in grade SS10 e K30
Pr: from 5,5 to 12,0 mm
D: from 5,95 to 12,98 mm
L: 16,00 mm
Angle: 5°
Available in grade SS6, SS10, K30P, SG2
H: from 12 to 15 mm
L: from 8 to 10 mm
S: from 4 to 5 mm
Available in grade SS6, SS10, K30P
H: from 12 to 20 mm
L: from 8 to 12 mm
S: from 5 to 7 mm
Available in grade SG2, SS10, SS20, K30P
H: from 16 to 20 mm
L: 12 mm
S: from 3,0 to 3,5 mm
Tungsten Carbide Rods for short drillsAvailable in grade K30
D: from 2,5 to 12,0 mm
H: from 8 to 18 mm
Tip angle: 75°/85°
Available in grade K30
D: from 4,40 to 6,50 mm
H: from 7 to 9 mm
Tip angle: 75°/85°
Tungsten Carbide Pyramid rods for short drillsAvailable in grade K30
D: from 6 to 8 mm
H: from 8 to 10 mm
Tip angle: 75°
Tungsten Carbide Ends for chiselAvailable in grade K30
D: from 5,00 to 9,00 mm
H: from 15,00 to 16,00 mm
Point angle: 90°
Tungsten Carbide Inserts for chain saw (Kind F)Available in grade SS6, SS10,K20, K30
H: from 12,7 to 13,0 mm
L: from 12,7 to 13,0 mm
D: from 6,0 to 7,0 mm
Type: ground and unground
Tungsten Carbide Inserts for chain saw （Kind K)Available in grade: SS6, SS10,K20, K30
H: 12,7 mm
L: 12,7 mm
D: 6,0 mm
Type: ground and unground
Tungsten Carbide CuspsAvailable in grade: SS6, SS10 e K30
D: from 8 to 22 mm
H: from 18 to 32 mm
Tungsten Carbide CuspsAvailable in grade: SS6, SS10 e K30
Gradi: SS6, SS10 e K30
D: from 8 to 22 mm
H: from 16 to 35 mm
Download full datasheet